If your company is to do parts processing of automated equipment; do general stamping mold processing; or do part processing of batch products. The accuracy and finish requirements are not very high. However, the speed is very high. At this time, you can pick the fast-moving wire to cut the machine.
On the basis of the above, accidentally repair the knife. There are some parts that need to be repaired to achieve the desired finish. We are able to select the glory and fast wire to cut the machine.
If your company is doing it. Some mold parts are processed, especially plastic molds, die-casting molds, or some parts that require higher processing. The accuracy and finish of the workpiece are required to be higher. Mainly to cut a few individual parts, in the case of general power requirements, we can select the middle wire to cut the machine.
If your company has precision in machined parts, the finish requirements are very high. Speed requirements are average. There are more holes in the processing. It is required to move the carriage of the machine tool faster. At this time, we can select the servo to cut the machine. |