One, ZNC EDM host features:
1, provide 60 sets of file storage, triaxial coordinates can be metric switch.
2, with 10 automatic repair function.
(1) Self-editing: Edit processing conditions according to personal experience;
(2) AUTOZ auto-editing: given the maximum depth of the initial current and the finished thickness selection, the processing conditions will be automatically edited;
(3) Smart Condition Editing: As long as the electrode shape, electrode and workpiece materials, electrode cross-sectional area, and processing completion thickness selection and depth setting are automatically edited, the above three editing methods can be used: Medium-fine finish processing once.
3. The discharge conditions are automatically adjusted. When the discharge is unstable, the computer will modify the discharge efficiency and working time by itself. After stabilization, the discharge conditions will be automatically restored and the processing conditions can be modified at any time during processing.
4, automatic anti-carbon detection function, when the case of carbon deposition plus instability, the computer automatically adjusts the processing parameters, and increase the slag height, when the stability is automatically restored.
5. Slow-jumping fast-and-slow two-step bouncing (high jump), so that large-area processing is stable, the fire pattern is uniform, and the speed of large-area electrode processing is effectively improved.
6. The programmable high and low two-step bouncing allows for the smooth discharge of carbon slag from deep hole or wafer processing, preventing carbon deposition and effectively improving the efficiency of deep hole and sheet processing.
7, the new design of the power supply box and 15" CRT (display screen) in line with European CE safety specifications, can be dust-proof, waterproof, anti-interference, improve the life of the electronic board.
8, using industrial PC-BASE controller instead of using DOM new memory to replace the traditional hard disk, read the file faster and more stable, more suitable for industrial use.
9, with upward discharge machining function, making special parts easier to process.
10. It has two independent processing coordinate systems. The male and female models can be divided or processed in different coordinate systems.
11, using high-speed CPU as the core of the discharge circuit, the discharge gap sampling 20 million times per second, can make the best adjustment of the discharge in time, so that the discharge is more stable
12. The hardware detection loop can be turned on, and the servo tracking can be performed automatically by hardware, which is more effective in small area deep hole processing.
13. The main CPU adopts industrial-grade low-power CPU, and even if there is no fan, it can work stably.
14, to provide 10,000 sets of file storage, you can store 10,000 different mold processing conditions. With multiple sets of machining coordinate memory function.
15, humanized operation, 3D interface display, different display information classification on different pages, you can turn pages and operate at any time.
16, discharge 2 to 10 times pulled up to the set position and then go to processing, for deep hole processing has a good slagging effect.
17. It has the function of eliminating secondary discharge and rapid pulling or discharging of carbon deposits.
18, the energy control function can make the processing effect more uniform. Turning off energy control can make graphite processing faster.
19. Two independent processing coordinate systems. The male and female models can be processed in different coordinate systems.
20, after power off and restart the system automatically load the last processing conditions and processing coordinates, you can directly press the wire control box discharge without any buttons on the moving panel.
21, pull-up speed segmentation, in the case of ensuring that the electrode is not pulled deformation in the case of increasing the servo speed, improve the efficiency of large-area processing.
22. Coordinates and machining data are stored separately, and the same machining conditions can be quickly added in different coordinate machining. |