| 1. Can process high-precision perforations with a diameter of 0.20-3.0mm and a maximum depth to diameter ratio of 400:1 or higher.
2. Can process various conductive materials such as stainless steel, quenched steel, hard alloys, copper, aluminum, etc.
3. It can remove drill bits and taps that are broken in the workpiece without damaging the original hole or thread.
4. The processing speed can reach 30-60mm per minute.
5. Can penetrate directly from slopes and surfaces.
6. Control mode, fully automatic CNC machining.
7. Directly use tap water as the working fluid.
8. High quality products with the latest technology.
9. The spindle adopts imported high wear-resistant sealing materials.
10. Adopting an independent PC board, it has low faults and is easy to maintain.
11. Automatic protection function for leakage and short circuit. |
Location：
