CNC lathe

1, can automatically turn a variety of rotating surfaces, such as cylindrical surface, conical surface, special surface, etc., and can be grooving, threading, boring, hinge, drilling, high efficiency, strong applicability.

2 The machine tool has high precision, the system minimum setting unit is 0.001mm, X-axis repeatability positioning accuracy is 0.010mm, Z-axis repeatability positioning accuracy is 0.012mm. The spindle bearing adopts Harbin Bearing's high-precision double-bearing ball bearing. The headstock gears are all super audio quenching and precision tooth grinding, with high precision and low noise.

3, bed guide rail after supersonic quenching CNC grinding, high hardness, good rigidity, higher accuracy.

4. The ball screw adopts the integral inner circulation screw, and the matched angular contact ball bearing is supported and pre-tensioned. Guide rails, screw rods and other centralized automatic lubrication, with flexible movement, reduce thermal deformation, accuracy and stability characteristics.

5, electric tool holder has four stations vertical, six stations horizontal, using precision gear plate positioning, repeat positioning accuracy.

6. The tailstock adopts eccentric lock mechanism and thread locking, which is faster and more secure. The tailstock sleeve has a device for preventing the rotation of the drill bit, which effectively protects the tailstock component.

7, programming using ISO international standard code, the keyboard manually enter or import with a USB interface. With power off protection and diagnostic functions. The CNC system uses the famous KND1OOTi products from Beijing, GSK980, and other famous domestic products. Other systems can also be selected according to user requirements.

8. The user can select various types of applicable machine tools according to the characteristics of his products:

Type A: Full stepless speed change (100-2000 rpm). This machine is suitable for high speed finishing and frequent shifting.

Type B: Multi-pole mechanical speed control (52-1210 rpm). This machine is suitable for low speed large cutting, single speed change.

C-type: high and low frequency control (L: 75 ~ 750 H: 150 ~ 1800 rev / min). More applicable.

 Another optional hydraulic chuck, hydraulic tailstock, pneumatic chuck, pneumatic tailstock, hand-held electronic pulse hand wheel, etc.

9, the series of CNC lathes is easy to operate, the cost is very high, put on the market for decades favored by customers.